User Manual
Getting Started With EZ- Module
www.cypress.com Document No.: 001-96841 Rev. ** 7
Figure 4: Power Modes
Device Se c uri t y
The EZ-BLE PRoC Module provides a number of options for the protection of flash memory from unauthorized access or
copying. Each row of flash has a single protection bit; these bits are stored in a supervisory flash row.
PRoC BLE Silicon Features
The BLE device used on the EZ-BLE PRoC Module is the Cypress PRoC BLE. For additional details on this device, refer to
the PRoC BLE device datasheet.
Host Recommended PCB Layout
The recommended host PCB layout pattern is shown in Figure 5. Dimensions shown are in mm.
Figure 5. Host Board Recommended PCB Layout Pattern
Note that the pad length shown includes overhang of the pad beyond the module outline. The pad length to the edge of the
module is 0.71 mm.
Power Mode
Current
Consumption
Code
Execution
Digital
Peripherals
Available
Analog
Peripherals
Available
Clock
Sources
Available
Wake
-
Up
Sources
Wake
-
Up
Time
Active
2.2 mA @ 6 MHz
Yes
All
All
All
-
-
Sleep
1.3 mA
No
All
All
All
Any interrupt source
0
Deep
-
Sleep
1.3 uA
No
WDT,
LCD,
I
2
C/SPI,
Link
-
Layer
POR, BOD
WCO,
32
-
kHz
ILO
GPIO,
WDT, SCB
25 us
Hibernate
150 nA
No
No
POR, BOD
No
GPIO
2 ms
Stop
60 nA
No
No
No
No
XRES
2 ms