User's Manual
Table Of Contents
- General Description
- Benefits
- More Information
- Contents
- Overview
- Pad Connection Interface
- Recommended Host PCB Layout
- Power Supply Connections and Recommended External Components
- Electrical Specification
- Environmental Specifications
- Regulatory Information
- Packaging
- Ordering Information
- Acronyms
- Document Conventions
- Document History Page
- Sales, Solutions, and Legal Information
Document Number: 002-15631 Rev.PRELIMINARY Page 27 of 38
PRELIMINARY
CYBLE-212006-01
CYBLE-202007-01
CYBLE-202013-11
EO Eye opening = ΔF2AVG/ΔF1AVG 0.8 – –
RF-PHY Specification
(TRM-LE/CA/05/C)
FTX, ACC Frequency accuracy –150 – 150 kHz
RF-PHY Specification
(TRM-LE/CA/06/C)
FTX, MAXDR Maximum frequency drift –50 – 50 kHz
RF-PHY Specification
(TRM-LE/CA/06/C)
FTX, INITDR Initial frequency drift –20 – 20 kHz
RF-PHY Specification
(TRM-LE/CA/06/C)
FTX, DR Maximum drift rate –20 – 20
kHz/
50
μs
RF-PHY Specification
(TRM-LE/CA/06/C)
IBSE1
In-band spurious emission at 2-MHz
offset
–––20dBm
RF-PHY Specification
(TRM-LE/CA/03/C)
IBSE2
In-band spurious emission at ≥3-MHz
offset
––-30dBm
RF-PHY Specification
(TRM-LE/CA/03/C)
TXSE1
Transmitter spurious emissions
(average), <1.0 GHz
– – -55.5 dBm FCC-15.247
TXSE2
Transmitter spurious emissions
(average), >1.0 GHz
– – -41.5 dBm FCC-15.247
RF Current Specifications
IRX Receive current in normal mode – 18.7 – mA –
IRX_RF Radio receive current in normal mode – 16.4 – mA Measured at V
DDR
IRX, HIGHGAIN Receive current in high-gain mode – 21.5 – mA –
ITX, 3dBm TX current at 3-dBm setting (PA10) – 20 – mA –
ITX, 0dBm TX current at 0-dBm setting (PA7) – 16.5 – mA –
ITX_RF, 0dBm Radio TX current at 0 dBm setting (PA7) – 15.6 – mA Measured at V
DDR
ITX_RF, 0dBm
Radio TX current at 0 dBm excluding
Balun loss
– 14.2 – mA
Guaranteed by design
simulation
ITX,-3dBm TX current at –3-dBm setting (PA4) – 15.5 – mA –
ITX,-6dBm TX current at –6-dBm setting (PA3) – 14.5 – mA –
ITX,-12dBm TX current at –12-dBm setting (PA2) – 13.2 – mA –
ITX,-18dBm TX current at –18-dBm setting (PA1) – 12.5 – mA –
Iavg_1sec, 0dBm
Average current at 1-second BLE
connection interval
– 17.1 –
μA
TXP: 0 dBm; ±20-ppm
master and slave clock
accuracy.
For empty PDU exchange
Iavg_4sec, 0dBm
Average current at 4-second BLE
connection interval
–6.1 – μA
TXP: 0 dBm; ±20-ppm
master and slave clock
accuracy.
For empty PDU exchange
General RF Specifications
FREQ RF operating frequency 2400 – 2482 MHz –
CHBW Channel spacing – 2 – MHz –
DR On-air data rate – 1000 – kbps –
Table 53. BLE Subsystem (continued)
Parameter Description Min Typ Max Units Details/Conditions