User's Manual

Document Number: 002-xxxxx Rev. ** Page 28 of 42
PRELIMINARY
CYBLE-013025-00
CYBLE-013030-00
RF Specifications
Table 19. Receiver RF Specifications
Parameter Mode and Conditions Min Typ Max Unit
Receiver Section
1
1. 30.8% PER.
Frequency range – 2402 – 2480 MHz
RX sensitivity (standard) 0.1%BER, 1 Mbps – –94 – dBm
RX sensitivity (low current) – –91.5 – dBm
Input IP3 – –16 – – dBm
Maximum input – –10 – – dBm
Interference Performance
<Superscript>1,2
2. Desired signal is 3 dB above the reference sensitivity level (defined as –70 dBm).
C/I cochannel 0.1%BER – – 21 dB
C/I 1 MHz adjacent channel 0.1%BER – – 15 dB
C/I 2 MHz adjacent channel 0.1%BER – – –17 dB
C/I ℜ≥ 3 MHz adjacent channel 0.1%BER – – –27 dB
C/I image channel 0.1%BER – – –9.0 dB
C/I 1 MHz adjacent to image channel 0.1%BER – – –15 dB
Out-of-Band Blocking Performance (CW)
1,2
30 MHz to 2000 MHz 0.1%BER
3
3. Measurement resolution is 10 MHz.
– –30.0 – dBm
2003 MHz to 2399 MHz 0.1%BER
4
4. Measurement resolution is 3 MHz.
– –35 – dBm
2484 MHz to 2997 MHz 0.1%BER
4
– –35 – dBm
3000 MHz to 12.75 GHz 0.1%BER
5
5. Measurement resolution is 25 MHz.
– –30.0 – dBm
Spurious Emissions
30 MHz to 1 GHz – – – –57.0 dBm
1 GHz to 12.75 GHz – – – –55.0 dBm
Table 20. Transmitter RF Specifications
Parameter Minimum Typical Maximum Unit
Transmitter Section
Frequency range 2402 – 2480 MHz
Output power adjustment range –20 – 4 dBm
Default output power – 4.0 – dBm
Output power variation – 2.0 – dB
Adjacent Channel Power
|M – N| = 2 – – –20 dBm
|M – N| ℜ≥ 3 – – –30 dBm
Out-of-Band Spurious Emission