User's Manual
Table Of Contents
- General Description
- Benefits
- Overview
- Pad Connection Interface
- Recommended Host PCB Layout
- Module Connections
- Bluetooth Baseband Core
- Infrared Modulator
- Infrared Learning
- Wireless Charging
- Security
- Support for NFC Tag Based Pairing
- Bluetooth Smart Audio
- ADC Port
- Serial Peripheral Interface
- Microprocessor Unit
- Integrated Radio Transceiver
- Peripheral Transport Unit
- GPIO Port
- PWM
- Power Management Unit
- Electrical Characteristics
- RF Specifications
- Timing and AC Characteristics
- Environmental Specifications
- Regulatory Information
- Packaging
- Ordering Information
- Acronyms
- Document Conventions
- Document History Page
- Sales, Solutions, and Legal Information
Document Number: 002-xxxxx Rev. ** Page 6 of 42
PRELIMINARY
CYBLE-013025-00
CYBLE-013030-00
Recommended Host PCB Layout
Figure 5, Figure 6, Figure 7, and Ta ble 3 provide details that can be used for the recommended host PCB layout pattern for the
CYBLE-0130XX-00. Dimensions are in millimeters unless otherwise noted. Pad length of 1.27 mm (0.635 mm from center of the pad
on either side) shown in Figure 7 is the minimum recommended host pad length. The host PCB layout pattern can be completed using
either Figure 5, Figure 6, or Figure 7. It is not necessary to use all figures to complete the host PCB layout pattern.
Figure 5. CYBLE-0130XX-00 Host Layout (Dimensioned) Figure 6. CYBLE-0130XX-00 Host Layout (Relative to Origin)
Top View (Seen on Host PCB)
Top View (Seen on Host PCB)