Data Sheet

Document Number: 002-28053 Rev. ** Page 28 of 47
CYBT-343052-02
Chipset RF Specifications
All specifications in Table 1 5 are for industrial temperatures and are single-ended. Unused inputs are left open.
Table 15. Receiver RF Specifications
Parameter Conditions Min Typ
1
1. Typical operating conditions are 1.22V operating voltage and 25°C ambient temperature.
Max Unit
General
Frequency range – 2402 – 2480 MHz
RX sensitivity
2
2. The receiver sensitivity is measured at BER of 0.1% on the device interface.
– – –91.5 – –
Maximum input GFSK, 1 Mbps – – –20 dBm
Interference Performance
TBD
Out-of-Band Blocking Performance (CW)
3
3. Meets this specification using front-end band pass filter.
30 MHz–2000 MHz 0.1% BER – –10.0 – dBm
2000–2399 MHz 0.1% BER – –27 –
2498–3000 MHz 0.1% BER – –27 –
3000 MHz–12.75 GHz 0.1% BER – –10.0 –
Intermodulation Performance
4
4. f0 = –64 dBm Bluetooth-modulated signal, f1 = –39 dBm sine wave, f2 = –39 dBm Bluetooth-modulated signal, f0 = 2f1 – f2, and |f2 – f1| = n*1 MHz, where n is 3, 4,
or 5. For the typical case, n = 4.
BT, Df = 4 MHz – –39.0 – – dBm
Spurious Emissions
5
5. Includes baseband radiated emissions.
30 MHz to 1 GHz – – – –62 dBm
1 GHz to 12.75 GHz – – – –47
65 MHz to 108 MHz FM RX – –147 – dBm/Hz
746 MHz to 764 MHz CDMA – –147 –
851–894 MHz CDMA – –147 –
925–960 MHz EDGE/GSM – –147 –
1805–1880 MHz EDGE/GSM – –147 –
1930–1990 MHz PCS – –147 –
2110–2170 MHz WCDMA – –147 –
Notes
7. Typical operating conditions are 1.22-V operating voltage and 25°C ambient temperature.
8. The receiver sensitivity is measured at BER of 0.1% on the device interface.
9. Meets this specification using front-end band pass filter.