Specifications
Table Of Contents
- CYBT-243053-02, EZ-BT™ Module
- General Description
- Benefits
- More Information
- Overview
- Pad Connection Interface
- Recommended Host PCB Layout
- Module Connections
- Connections and Optional External Components
- Critical Components List
- Antenna Design
- Bluetooth Baseband Core
- Power Management Unit
- Integrated Radio Transceiver
- Microcontroller Unit
- Peripherals and Communication Interfaces
- Electrical Characteristics
- Chipset RF Specifications
- Timing and AC Characteristics
- Environmental Specifications
- Regulatory Information
- Packaging
- Ordering Information
- Acronyms
- Document Conventions
- Document History Page
- Sales, Solutions, and Legal Information
Document Number: 002-28015 Rev. ** Page 26 of 42
PRELIMINARY
CYBT-243053-02
Chipset RF Specifications
Table 20, Table 21, Table 22, and Table 23 apply to single-ended industrial temperatures. Unused inputs are left open.
Table 20. BR/EDR - Receiver RF Specifications
Parameter Mode and Conditions Min Typ Max Unit
Receiver Section
Frequency range – 2402 – 2480 MHz
RX sensitivity
GFSK, BDR GFSK 0.1% BER, 1 Mbps – –91
[6]
–dBm
EDR 2M – –93.5 – dB
EDR 3M – –87.5 – dB
Maximum input – –20 – – dBm
Interference Performance
C/I cochannel
GFSK, BDR GFSK 0.1% BER
[7]
–––dB
C/I 1 MHz adjacent channel – – – dB
C/I 2 MHz adjacent channel – – – dB
C/I 3 MHz adjacent channel – – – dB
C/I image channel – – – dB
C/I 1 MHz adjacent to image channel – – – dB
Out-of-Band Blocking Performance (CW)
[8]
30 MHz to 2000 MHz
BDR GFSK 0.1% BER
– –10.0 – dBm
2000 MHz to 2399 MHz – –27 – dBm
2498 MHz to 3000 MHz – –27 – dBm
3000 MHz to 12.75 GHz – –10.0 – dBm
Intermodulation Performance
[7]
BT, interferer signal level BR GFSK 0.1% BER – – –39.0 dBm
Spurious Emissions
30 MHz to 1 GHz – – – –57.0 dBm
1 GHz to 12.75 GHz – – – –55.0 dBm
Table 21. BR/EDR - Transmitter RF Specifications
Parameter Min Typ Max Unit
Transmitter Section
Frequency range 2402 – 2480 MHz
Class 1: BR TX power – 10.5 – dBm
Class 1: EDR 2M and 3M TX power – 4 – dBm
Notes
6. The receiver sensitivity is measured at BER of 0.1% on the device interface with dirty TX Off.
7. Desired signal is 10 dB above the reference sensitivity level (defined as –70 dBm).
8. Desired signal is 3 dB above the reference sensitivity level (defined as –70 dBm).