Specifications

Document Number: 002-28015 Rev. ** Page 27 of 42
PRELIMINARY
CYBT-243053-02
kHz1000930–20 dB bandwidth
Adjacent Channel Power
dBm–20––|M – N| = 2
|M – N| 3
[9]
dBm–40––
Out-of-Band Spurious Emission
dBm–36.0––30 MHz to 1 GHz
dBm–30.0––1 GHz to 12.75 GHz
1.8 GHz to 1.9 G dBm–47.0––Hz
dBm–47.0––5.15 GHz to 5.3 GHz
LO Performance
kHz+75––75Initial carrier frequency tolerance
Frequency Drift
kHz+25––25DH1 packet
kHz+40––40DH3 packet
kHz+40––40DH5 packet
kHz/50 µs20––20Drift rate
Frequency Deviation
Average deviation in payload (se 17–140quence used is 00001111) kHz5
Maximum deviation in payload ( k––115sequence used is 10101010) Hz
MHz–1–Channel spacing
Table 22. BLE RF Specifications
Parameter Conditions Min Typ Max Unit
MHz2480–2402N/AFrequency range
RX sensitivity
[10]
GFSK, BDR GFSK 0.1% BER 0.1% BER,
1 Mbps
dBm––94.5–
dBm–10.5–N/ATX power
kHz275255225N/AMod Char: Delta F1 average
Mod Char: Delta F2 max
[11]
%––99.9N/A
%––0.8N/AMod Char: Ratio
Table 23. BLE2 RF Specifications
Parameter Conditions Min Typ Max Unit
RX sensitivity
[12]
dBm––89.5––
dBm–
10.5
––TX power
Table 21. BR/EDR - Transmitter RF Specifications (continued)
Parameter Min Typ Max Unit
Notes
9. Meets SIG Specification.
10. Dirty TX is Off.
11. At least 99.9% of all delta F2 max frequency values recorded over 10 packets must be greater than 185 kHz.
12. 255 byte packet.