Specifications

Document Number: 002-29354 Rev. ** Page 26 of 45
PRELIMINARY
CYBT-273063-02
CYBT-263064-02
CYBT-263065-02
Digital I/O Characteristics
ADC Characteristics
PSRR
C
OUT
= 2.2 μF, 1.235 V ≤ V
IN
≤ 1.4 V, V
OUT
= 1.2 V,
I
OUT
= 20 mA
f = 1 kHz
f = 100 kHz
25
13
––dB
dB
Noise
C
OUT
= 2.2 μF, V
IN
= 1.235 V, V
OUT
= 1.2 V, I
OUT
=
20 mA
f = 30 kHz
f = 100 kHz
––80
70
nV√Hz
nV√Hz
Table 18. RF LDO (continued)
Parameter Conditions Min. Typ. Max. Unit
Table 19. Digital I/O Characteristics
Characteristics Symbol Minimum Typical Maximum Unit
Input low voltage (VDD = 3 V) V
IL
––0.8V
Input high voltage (VDD = 3 V) V
IH
2.4 – – V
Input low voltage (VDD = 1.8 V) V
IL
––0.4V
Input high voltage (VDD = 1.8 V) V
IH
1.4 – – V
Output low voltage V
OL
––0.4V
Output high voltage V
OH
VDDO – 0.4 V – – V
Input low current I
IL
––1.0μA
Input high current I
IH
––1.0μA
Output low current (VDD = 3 V, V
OL
= 0.4 V) I
OL
––4.0mA
Output low current (VDD = 3 V, V
OL
= 1.8 V) I
OL
––2.0mA
Output high current (VDD = 3 V, V
OH
= 2.6 V) I
OH
––8.0mA
Output high current (VDD = 1.8 V, V
OH
= 1.4 V) I
OH
––4.0mA
Input capacitance C
IN
––0.4pF
Table 20. Electrical Characteristics
Parameter Symbol Conditions/Comments Min. Typ. Max. Unit
Current consumption I
TOT
––23mA
Power down current – At room temperature – 1 – μA
ADC Core Specification
ADC reference voltage VREF From BG with ±3% accuracy – 0.85 – V
ADC sampling clock – – – 12 – MHz
Absolute error – Includes gain error, offset and
distortion. Without factory calibration.
––5%
Includes gain error, offset and
distortion. After factory calibration.
––2%
ENOB – For audio application 12 13 – Bit
For static measurement 10 – –
ADC input full scale FS For audio application – 1.6 –
For static measurement 1.8 – 3.6