Specifications

Document Number: 002-29354 Rev. ** Page 28 of 45
PRELIMINARY
CYBT-273063-02
CYBT-263064-02
CYBT-263065-02
Chipset RF Specifications
Table 21, Table 22, Tabl e 23, and Table 24 apply to single-ended industrial temperatures. Unused inputs are left open.
Table 21. BR/EDR - Receiver RF Specifications
Parameter Mode and Conditions Min Typ Max Unit
Receiver Section
Frequency range – 2402 – 2480 MHz
RX sensitivity
GFSK, BR GFSK 0.1% BER, 1 Mbps – –92
[6]
–dBm
EDR 2M – –93.5 –
dB
EDR 3M – –87 –
Maximum input – –20 – – dBm
Interference Performance
C/I cochannel GFSK, BR GFSK 0.1% BER
[7]
––11.0
dB
C/I 1 MHz adjacent channel GFSK, BR GFSK 0.1% BER
[7]
––0.0
C/I 2 MHz adjacent channel GFSK, BR GFSK 0.1% BER
[7]
– – –30.0
C/I ≥ 3 MHz adjacent channel GFSK, BR GFSK 0.1% BER
[7]
– – –40.0
C/I image channel GFSK, BR GFSK 0.1% BER
[7]
–––9.0
C/I 1 MHz adjacent to image channel GFSK, BR GFSK 0.1% BER
[7]
– – –20.0
Out-of-Band Blocking Performance (CW)
[8]
30 MHz to 2000 MHz BR GFSK 0.1% BER – –10.0 –
dBm
2000 MHz to 2399 MHz BR GFSK 0.1% BER – –27 –
2498 MHz to 3000 MHz BR GFSK 0.1% BER – –27 –
3000 MHz to 12.75 GHz BR GFSK 0.1% BER – –10.0 –
Intermodulation Performance
[7]
BT, interferer signal level BR GFSK 0.1% BER – – –39.0 dBm
Spurious Emissions
30 MHz to 1 GHz – – – –57.0
dBm
1 GHz to 12.75 GHz – – – –55.0
Notes
6. The receiver sensitivity is measured at BER of 0.1% on the device interface with dirty TX Off.
7. Desired signal is 10 dB above the reference sensitivity level (defined as –70 dBm).
8. Desired signal is 3 dB above the reference sensitivity level (defined as –70 dBm).