Data Sheet
Table Of Contents
- General description
- Module description
- Power consumption
- Functional capabilities
- Benefits
- More information
- References
- Development environments
- Technical support
- Contents
- 1 Overview
- 2 Pad connection interface
- 3 Recommended host PCB layout
- 4 Module connections
- 5 Connections and optional external components
- 6 Functional description
- 7 Integrated radio transceiver
- 8 Peripheral and communication interfaces
- 9 Keyboard scanner
- 10 Clock frequencies
- 11 GPIO port
- 12 PWM
- 13 Power management unit
- 14 Electrical characteristics
- 15 Chipset RF specifications
- 16 Timing and AC characteristics
- 17 Environmental specifications
- 18 Regulatory information
- 19 Packaging
- 20 Ordering information
- 21 Acronyms
- 22 Document conventions
- Revision History
Preliminary Datasheet 33 of 58 002-33419 Rev. **
2021-07-22
AIROC™ Bluetooth® LE module
PWM
12 PWM
The CYBLE-3x307x-02 has four PWMs. The PWM module consists of the following:
• PWM0-5. Each of the six PWM channels contains the following registers:
- 16-bit initial value register (read/write)
- 16-bit toggle register (read/write)
- 16-bit PWM counter value register (read)
• PWM configuration register shared among PWM0-5 (read/write). This 18-bit register is used:
- To configure each PWM channel
- To select the clock of each PWM channel
- To change the phase of each PWM channel
Figure 12 shows the structure of one PWM.
Figure 12 PWM block diagram