Data Sheet
Table Of Contents
- General description
- Module description
- Power consumption
- Functional capabilities
- Benefits
- More information
- References
- Development environments
- Technical support
- Contents
- 1 Overview
- 2 Pad connection interface
- 3 Recommended host PCB layout
- 4 Module connections
- 5 Connections and optional external components
- 6 Functional description
- 7 Integrated radio transceiver
- 8 Peripheral and communication interfaces
- 9 Keyboard scanner
- 10 Clock frequencies
- 11 GPIO port
- 12 PWM
- 13 Power management unit
- 14 Electrical characteristics
- 15 Chipset RF specifications
- 16 Timing and AC characteristics
- 17 Environmental specifications
- 18 Regulatory information
- 19 Packaging
- 20 Ordering information
- 21 Acronyms
- 22 Document conventions
- Revision History
Preliminary Datasheet 37 of 58 002-33419 Rev. **
2021-07-22
AIROC™ Bluetooth® LE module
Chipset RF specifications
Table 16 Transmitter RF Specifications (TBD)
Parameter Conditions Min Typ Max Unit
General
Frequency range – 2402 – 2480 MHz
Class 1: GFSK TX power – – 10 – dBm
Power control step – 2 4 8 dB
Out-of-Band Spurious Emissions
30 MHz to 1 GHz – – – –36.0
[12]
dBm
1 GHz to 12.75 GHz – – – –30.0
[13]
1.8 GHz to 1.9 GHz – – – –47.0
5.15 GHz to 5.3 GHz – – – –47.0
Notes
12.Maximum value is the value required for Bluetooth® qualification.
13.Meets this spec using a front-end band-pass filter.
Table 17 Bluetooth® LE RF Specifications
Parameter Conditions Min Typ Max Unit
Frequency range N/A 2402 – 2480 MHz
RX sense
[14]
GFSK, 0.1% BER, 1 Mbps – –94.5 –
dBm
TX power N/A – 12 –
Mod Char: Delta F1 average N/A 225 255 275 kHz
Mod Char: Delta F2 max
[15]
N/A 99.9 – –
%
Mod Char: Ratio N/A 0.8 0.95 –
Notes
14.Dirty TX is OFF.
15.At least 99.9% of all delta F2 max frequency values recorded over 10 packets must be greater than 185 kHz.