User's Manual

PRELIMINARY
CYBLE-224110-00
Document Number: 002-11264 Rev. *A Page 32 of 43
ITX_RF, 0dBm
Radio TX current at 0 dBm excluding
Balun loss
– 14.2 – mA
Guaranteed by design
simulation
ITX,-3dBm TX current at –3-dBm setting (PA4) – 15.5 – mA Radio only
ITX,-6dBm TX current at –6-dBm setting (PA3) – 14.5 – mA Radio only
ITX,-12dBm TX current at –12-dBm setting (PA2) – 13.2 – mA Radio only
ITX,-18dBm TX current at –18-dBm setting (PA1) – 12.5 – mA Radio only
Iavg_1sec, 0dBm
Average current at 1-second BLE
connection interval
– 26.3 – µA
TXP: +9.5 dBm; ±20-ppm
master and slave clock
accuracy.
For empty PDU exchange
PA/LNA active
Iavg_4sec, 0dBm
Average current at 4-second BLE
connection interval
–TBD – µA
TXP: +9.5 dBm; ±20-ppm
master and slave clock
accuracy.
For empty PDU exchange
PA/LNA active
General RF Specifications
FREQ RF operating frequency 2400 – 2482 MHz
–
CHBW Channel spacing – 2 – MHz
–
DR On-air data rate – 1000 – kbps
–
IDLE2TX BLE.IDLE to BLE. TX transition time – 120 140 µs
–
IDLE2RX BLE.IDLE to BLE. RX transition time – 75 120 µs
–
RSSI Specifications
RSSI, ACC RSSI accuracy – ±5 – dB
–
RSSI, RES RSSI resolution – 1 – dB
–
RSSI, PER RSSI sample period – 6 – µs
–
Table 56. BLE Subsystem (continued)
Parameter Description Min Typ Max Unit Details/Conditions