User's Manual
Table Of Contents
- General Description
- More Information
- Contents
- Overview
- Pad Connection Interface
- Recommended Host PCB Layout
- Power Supply Connections and Recommended External Components
- Electrical Specifications
- Environmental Specifications
- Regulatory Information
- Packaging
- Ordering Information
- Acronyms
- Document Conventions
- Document History Page
- Sales, Solutions, and Legal Information
PRELIMINARY
CYBLE-224110-00
Document Number: 002-11264 Rev. *A Page 4 of 43
Overview
Module Description
The CYBLE-224110-00 is an integrated wireless module designed to be soldered to the main host board.
Module Dimensions and Drawing
Cypress reserves the right to select components (including the appropriate BLE device) from various vendors to achieve the BLE
module functionality. Such selections will guarantee that all height restrictions of the component area are maintained. Designs should
be completed with the physical dimensions provided in the mechanical drawings (see Figure 1). All dimensions are in millimeters (mm).
See Figure 1 on page 5 for the mechanical reference drawing for CYBLE-224110-00.
Table 1. Module Design Dimensions
Dimension Item Specification
Module dimensions
Length (X) 9.50 ± 0.15 mm
Width (Y) 15.40 ± 0.15 mm
Antenna location dimensions
Length (X) 7.00 mm
Width (Y) 5.00 mm
PCB thickness Height (H) 0.50 ± 0.10 mm
Shield height Height (H) 1.10 ± 0.10 mm
Maximum component height Height (H) 1.30 mm typical (chip antenna)
Total module thickness (bottom of module to highest component) Height (H) 1.80 mm typical