Datasheet

Aalap Tripathy, 2004P3PS208

PSOC Lab, BITS Pilani Goa Campus

have used this for convenience of the external connections which I propose to use.

Remember to connect Port_0_0 to Port_0_1 because this is what I am assuming from the next step onwards. That is

the square wave generated will be available at Port_0_1 now.

Note: You can connect the digital output to Port0.0 and route that into the analog input. The analog connection is

independent of the digital connection, so both can be connected to the same

13. Scroll down to the AnalogColumns_InputMux0 and select Port_0_1.

This means Port_0_1 is now to be selected by PSoC Designer when configuring the blocks

14. Now select AnalogColumns_InputMux0 as the Input to the PGA block.

This effectively makes the input at Port_0_1 of the PSoC available as input