Datasheet

Aalap Tripathy, 2004P3PS208
PSOC Lab, BITS Pilani Goa Campus
37
17. Click on the Input of BPF2_2 module and select ASC10 (again this name might be different if your placement has been
done differently). But make sure that you connect from the BPF2_1 FLIN module.
18. To obtain the final output (now a sine wave) connect the AnalogBus of the BPF2_2 to the AnalogOutBus_1
19. You will notice that this is fed to buf1. Click on this to connect to Port0_5. Now the output can be sampled from Pin2
(Port0[5]) of the PSoC