User manual

Contents
CY3280-BK1 Universal CapSense Controller Quick Start, Doc. # 001-37959 Rev. ** 3
1. Getting Started 5
Kit Contents .................................................................................................................5
Installing Software .......................................................................................................5
Install PSoC Express Development Software ..................................................5
Install PSoC Designer Development Software.................................................5
Additional CY3280-BK1 Universal CapSense Controller CD Content .............6
CapSense Best Practices ............................................................................................6
2. Use the Board as Factory Programmed 7
Power the Board ..........................................................................................................7
Test the Board .............................................................................................................8
Resetting the Board to the Original Factory Programming ..........................................8
3. Create a PSoC Express CapSense Project 9
Start a New Project......................................................................................................9
Add the First CSA Button Driver to Your Design .........................................................9
Add a Second CSA Button Driver to Your Design .....................................................10
Add the First LED Value Driver to Your Design.........................................................10
Add the Second LED Value Driver to Your Design....................................................10
Define the LED Transfer Function .............................................................................11
Build Your Project ......................................................................................................12
Assign Drivers to Pins................................................................................................12
Program the CY3280-20x34 UCC Board...................................................................13
Test the Board ...........................................................................................................14
What’s Next? .............................................................................................................14
4. Tune a PSoC Express CapSense Project 15
Open Your PSoC Express Project.............................................................................15
Add an I2C Slave Driver to Your Design ...................................................................15
Build the Project.........................................................................................................15
Assign Drivers to Pins................................................................................................16
Program the CY3280-20x34 UCC Board...................................................................16
Tune Button1 .............................................................................................................16
5. Create a PSoC Designer CapSense Project 19
Start a New Project....................................................................................................19
Add CSA, LED, and I2C User Modules to Your Design ............................................20
Configure CSA, LED, and I2C User Modules in Your Design ...................................21
Configure Sensor Pins Using the CSA Wizard ..........................................................21
Add Code to main.c and Build the Project .................................................................22
Program the CY3280 - 20x34 Board .........................................................................23
Test the Board ...........................................................................................................23
[+] Feedback