User manual

CY3280-BK1 Universal CapSense Controller Quick Start, Doc. # 001-37959 Rev. ** 9
3. Create a PSoC Express CapSense Project
This project walks you through the steps of creating a PSoC Express project from scratch. At the end
of the project, you will be able to touch a button on the board and see the corresponding LED light
up.
Start a New Project
3.1 Open PSoC Express.
3.2 Select File  New Project.
3.3 Name the project MyExpressProject.
3.4 If needed, click Browse to save the project in a different location.
3.5 Click OK.
Add the First CSA Button Driver to Your Design
3.6 Ensure the Driver Catalog pane is visible by selecting View  Driver Catalog.
3.7 Each driver and valuator has certain properties associated with it. For the purposes of this
example, ensure View
 Use Add Driver Dialog is checked.
3.8 In the Driver Catalog pane, go to Inputs  CapSense  CapSense - CSA, right-click on But-
ton - CSA, and select Add to Design. The Add Input Driver window will open.
3.9 In the Add Input Driver window, name the driver Button1.
[+] Feedback