User manual

CY3280-MBR3 Evaluation Kit User Guide, Doc. #: 001-89905 Rev. *B 25
Kit Operation
Figure 3-13. Enabling Button Sensors Using EZ-Click 2.0
Note: The CapSense buttons BTN1/CS3, BTN2/CS4, BTN3/CS5, and BTN4/CS6 on the CY3280-
MBR3 EVK correspond to Button4, Button5, Button6, and Button7 in the EZ-Click 2.0 customizer
tool, which map to pins CS3, CS4, CS5, and CS6 respectively on the MBR3 device. Figure 3-15
shows the corresponding four buttons for reference.
9. The sensor names can be modified if desired, as shown in Figure 3-14.
Figure 3-14. Changing Sensor Names