User Manual Part 1

CY8CKIT-042-BLE Bluetooth® Low Energy (BLE) Pioneer Kit Guide, Doc. # 001-93731 Rev. *A 102
Hardware
5.1.8 Push Buttons
The board contains a reset push button and a user push button, as shown in Figure 5-16. The reset
button is connected to the XRES pin of BLE and is used to reset the BLE device. The user button is
connected to P2[7] of the BLE device. Both the push buttons connect to ground on activation (active
low).
Figure 5-16. Schematics and Board Highlight of Reset Button and User Push Button
RESET USER SWITCH
P2_7/XRES
/XRES
0402
C25
0.1 uF
SW2
EVQ-PE105K
1 2
SW1
EVQ-PE105K
1 2
RESET (SW1)
User Button
(SW2)