User Manual Part 1

CY8CKIT-042-BLE Bluetooth® Low Energy (BLE) Pioneer Kit Guide, Doc. # 001-93731 Rev. *A 12
Introduction
Figure 1-1. Kit Contents
If any part of the kit is missing, contact your nearest Cypress sales office for help: www.cypress.com/
go/support.
1.2 Board Details
The BLE Pioneer baseboard consists of the blocks shown in Figure 1-2.
1. RGB LED
2. BLE module reset button
3. CapSense proximity header
4. User button
5. CapSense slider
6. Arduino compatible I/O header (J2)
7. Arduino compatible power header (J1)
8. Digilent Pmod compatible I/O header (J5)
9. Cypress F-RAM 1 Mb (FM24V10-G)
10.PSoC 5LP - programmer and debugger (CY8C5868LTI-LP039)
11.PSoC 5LP I/O header (J8)
12.Coin cell holder (bottom side)
13.USB connector (J13)
14.Power LED
15.Status LED
16.System power supply jumper (J16) - LDO 1.9 V~5 V
17.Arduino compatible I/O header (J3/J4)