User Manual Part 1

CY8CKIT-042-BLE Bluetooth® Low Energy (BLE) Pioneer Kit Guide, Doc. # 001-93731 Rev. *A 45
Example Projects
Figure 4-4. Program Device in PSoC Creator
9. If the device is not yet acquired, PSoC Creator will open the programming window. Select
KitProg and click the Port Acquire button, as shown in Figure 4-5.
Note: The string following 'KitProg' is the serial ID for the programmer on the kit. Each kit will
have a unique serial ID. If various kits are connected to the same system, the serial ID can be
used to select the correct kit to program the firmware. Additionally, the serial ID starting with 'BLE'
belongs to the dongle (see Updating BLE Dongle for CySmart PC Tool on page 33) and provides
visual confirmation for dongles connected to the system.
Figure 4-5. Port Acquire
10.After the device is acquired, it is shown in a structure below the KitProg. Click the
Connect but-
ton and then OK to exit the window and start programming, as shown in Figure 4-6.