User Manual Part 1

CY8CKIT-042-BLE Bluetooth® Low Energy (BLE) Pioneer Kit Guide, Doc. # 001-93731 Rev. *A 46
Example Projects
Figure 4-6. Connect Device From PSoC Creator and Program
Note: As stated previously, the BLE Pioneer kit supports both Cypress BLE devices: PSoC 4 BLE
and PRoC BLE. Thus, there are two versions of each of the kit example projects demonstrating the
same functionality. Projects named with the prefix PSoC_4_BLE_ work with the PSoC 4 BLE Module
placed on the baseboard. Projects named with the prefix PRoC_BLE_ work with the PRoC BLE
Module placed on the baseboard. Ensure that the correct module is placed on the baseboard before
programming the device with the corresponding kit example projects.
The description, hardware configurations, and verification method of the kit example projects
explained in the following sections are valid for both PSoC 4 BLE and PRoC BLE devices. Unless
explicitly mentioned, the theory and usability for these example projects should be considered the
same for both the modules/devices.
This document refers to the BLE Pioneer kits, dongle, and PC/mobile as BLE Central or peripheral
devices. A BLE Central device is normally the master and requests/commands data from the
peripheral device. BLE-enabled phones and PCs are one such example. BLE peripheral devices, on
the other hand, store the actual data and send it to central devices when requested. Examples
include BLE-enabled sensors, proximity beacons, and so on.