User Manual Part 1

CY8CKIT-042-BLE Bluetooth® Low Energy (BLE) Pioneer Kit Guide, Doc. # 001-93731 Rev. *A 58
Example Projects
17.To disconnect from the device, click Disconnect, as shown in Figure 4-24.
Figure 4-24. Disconnect from the Device
18.To connect to this peripheral again, restart advertising by pressing the user button (SW2) on the
BLE Pioneer kit. Advertising is indicated by the blinking red LED.
4.2.4.2 CySmart iOS/Android App
To verify the CapSense and LED project using the CySmart mobile application (see CySmart iOS/
Android Application on page 152), follow these steps:
1. To verify the PSoC_4_BLE_CapSense_Slider_LED project, plug in the PSoC 4 BLE Module on
the baseboard.
Figure 4-25. BLE Pioneer Kit with PSoC 4 BLE Module