User Manual Part 1

CY8CKIT-042-BLE Bluetooth® Low Energy (BLE) Pioneer Kit Guide, Doc. # 001-93731 Rev. *A 59
Example Projects
To verify the PRoC_BLE_CapSense_Sider_LED project, plug in the PRoC BLE Module on the
baseboard.
Figure 4-26. BLE Pioneer Kit with PRoC BLE Module
2. Plug the BLE Pioneer kit into the PC to power using the J13 USB connector.
3. Program the kit with the CapSense and LED example projects. See Using Example Projects on
page 42 for programming instructions.
4. Press the user button (
SW2) on the BLE Pioneer kit to start the advertisement. This is indicated
by the blinking red LED on the BLE Pioneer kit.
5. Open the application on the mobile device. If Bluetooth is not enabled on the device, the
application will ask to enable it.
6. After Bluetooth is enabled, the application will automatically search for available BLE peripherals
and list them. Select the
BLE Slider and LED peripheral as shown in Figure 4-27.
Figure 4-27. BLE Slider and LED Peripheral