User Manual Part 1

CY8CKIT-042-BLE Bluetooth® Low Energy (BLE) Pioneer Kit Guide, Doc. # 001-93731 Rev. *A 64
Example Projects
Figure 4-34. Top Design for PRoC_BLE_CapSense_Proximity Project
4.3.2 Hardware Connections
■ Ensure that the correct BLE module is placed on the baseboard corresponding to the project
being used. PSoC_4_BLE_CapSense_Proximity works with the PSoC 4 BLE Module.
PRoC_BLE_CapSense_Proximity works with the PRoC BLE Module.
■ Connect a five-inch wire (provided as part of this kit) to the proximity connector J14 on the
baseboard. Loop the wire as shown in Figure 4-35.
Note: Ensure that the proximity sensor loop wire is kept away as much as possible from the BLE
antenna on the modules.
Figure 4-35. Proximity Sensor Connection on BLE Pioneer Kit with PSoC 4 BLE Module