User Manual Part 1

CY8CKIT-042-BLE Bluetooth® Low Energy (BLE) Pioneer Kit Guide, Doc. # 001-93731 Rev. *A 76
Example Projects
4.4.2 Hardware Connections
No specific hardware connections are required for this project because all connections are
hardwired on the board.
Ensure that the correct BLE module is placed on the baseboard corresponding to the project being
used. PSoC_4_BLE_Central_IAS works with the PSoC 4 BLE Module. PRoC_BLE_Central_IAS
works with the PRoC BLE Module. BLE_Dongle_Peripheral_IAS is the common project for both
workspaces and programs the BLE dongle with peripheral mode firmware.
The pin assignment for this project is in
PSoC_4_BLE_Central_IAS.cydwr/
PRoC_BLE_Central_IAS.cydwr in the Workspace Explorer, as shown in Figure 4-56.
Figure 4-56. Pin Selection for BLE IAS Central Example Project
Similarly, the pin assignment for the dongle peripheral project is in
BLE_Dongle_Peripheral_IAS.cydwr in the Workspace Explorer as shown in Figure 4-57.
Figure 4-57. Pin Selection for BLE IAS Peripheral Example Project