User Manual Part 1

CY8CKIT-042-BLE Bluetooth® Low Energy (BLE) Pioneer Kit Guide, Doc. # 001-93731 Rev. *A 79
Example Projects
2. In the PSoC Creator Workspace Explorer, right-click on the BLE_Dongle_Peripheral_IAS
project and select Set As Active Project, as shown in Figure 4-61.
Figure 4-61. Set Dongle Peripheral Project as Active
3. Program the dongle with the BLE_Dongle_Peripheral_IAS project described in Using Example
Projects on page 42.
Note: Do not update the public device address (inside the BLE component) for the
BLE_Dongle_Peripheral_IAS example project. This is because the central example project
looks for a particular public address equal to the one set on the peripheral BLE component.
Changing the BLE_Dongle_Peripheral_IAS example project public address will lead to no
connection with the BLE Central device on the BLE Pioneer kit.
4. Power the BLE Pioneer kit through USB connector J13.
5. In the Workspace Explorer, right-click on the
PSoC_4_BLE_Central_IAS project and select Set
As Active Project, as shown in Figure 4-62.