User Manual Part 2

CY8CKIT-042-BLE Bluetooth® Low Energy (BLE) Pioneer Kit Guide, Doc. # 001-93731 Rev. *A 142

Advanced Topics

10.If bootload is successful, the log of the tool displays “Programming Finished Successfully”;

otherwise, it displays “Failed” and a reason for the failure.

Notes:

■ The PSoC 5LP pins are brought to the PSoC 5LP GPIO header (J8). These pins are selected to

support high-performance analog and digital projects. See PSoC 5LP GPIO Header (J8) on

page 97 for pin information.

■ Take care when allocating the PSoC 5LP pins for custom applications. For example, P2[0]–P2[4]

are dedicated for programming the PSoC 4 BLE/PRoC BLE. See Schematics on page 168

before allocating the pins.

■ When a custom project is programmed onto the PSoC 5LP, the initial capability of the PSoC 5LP

to act as a programmer, USB-UART bridge, or USB-I

C bridge in not available.

■ The status LED does not function unless used by the custom project.

For additional information on bootloaders, refer to Cypress application note, AN73503 -

USB HID

Bootloader for PSoC 3 and PSoC 5LP