User's Manual

CY8CKIT-042-BLE-A Bluetooth® Low Energy (BLE) Pioneer Kit Guide, Doc. # 002-11468 Rev. *A 98
Hardware
5.1.4.3 PSoC 5LP GPIO Header (J8)
An 8×2 header is provided on the BLE Pioneer Baseboard to pull out several pins of PSoC 5LP to
support advanced features such as a low-speed oscilloscope and a low-speed digital logic analyzer
(see Figure 5-11). This header also contains the USB-Serial interface pins that can be used when
these pins are not accessible on the Arduino headers because a shield is connected.
Note: You can use PSoC 5LP for your own custom firmware.
Figure 5-11. Schematics and Board Highlight of PSoC 5LP GPIO Expansion Header