User's Manual

CY8CKIT-042-BLE-A Bluetooth® Low Energy (BLE) Pioneer Kit Guide, Doc. # 002-11468 Rev. *A 16
Introduction
Figure 1-7. Code Example Projects with Sample Code
1.3.2 Kit Code Examples
This kit includes a number of code examples, which can be used to quickly evaluate the functionality
of this kit. These examples are described in the Example Projects chapter on page 37.
If you are a beginner in BLE, refer to the PSoC Creator code examples such as BLE_FindMe and
BLE_Device_Information_Service as described in 1.3.1 PSoC Creator Code Examples. You may
also refer the application note Getting Started with PSoC 4 BLE.
The four Kit code examples viz CapSense Slider and LED, CapSense Proximity, BLE Central Mode
and Eddystone are intermediatory level examples that will help to design a system around the kit.
Refer to the 4.2 CapSense Slider and LED and later for details.
The CySmart Dongle code example is an advanced level example that will demonstrate a complete
solution around the kit. Refer to 4.6 BLE Dongle and LED Control for details.
1.3.3 PSoC Creator Help
Visit the PSoC Creator home page to download the latest version of PSoC Creator. Then, launch
PSoC Creator and navigate to the following items:
Quick Start Guide: Choose Help > Documentation > Quick Start Guide. This guide gives you
the basics for developing PSoC Creator projects.
Simple Component example projects: Choose File > Code Example. These example projects
demonstrate how to configure and use PSoC Creator Components.
System Reference Guide: Choose Help > System Reference Guide. This guide lists and
describes the system functions provided by PSoC Creator.