User guide

Memory, Micros, Embedded Computing & Peripherals
ON-LINE
www.rssingapore.com
28
OM = Order Multiple
The F28335 eZdsp starter kit is a complete software development platform for the TMS320F2833x series
of floating-point Digital Signal Controllers. The eZdsp kit includes an F28335 target board that features
integrated JTAG emulation, 128Kx16 asynchronous SRAM, CAN 2.0 and RS-232 interfaces, and
expansion headers that provide access to all F28335 I/O signals.
The kit also includes the Code Composer Studio
ᓽ Integrated Development Environment, a USB
interface to the host PC, and a universal power supply. This single orderable part number supports all
regions of the world.
20-pin DIP processor socket
Built-in Flash emulation for debugging and programming
2x User LED, Power LED, User switch, Reset switch
10-pin header for external circuit connection
The MSP-EXP430G2 LaunchPad is an easy-to-use flash programmer and debugging tool that provides
everything needed to start developing on MSP430 Value Line devices. It includes a DIP socketed target
board with integrated emulation to quickly program and debug MSP430 devices in-system through the
Spy Bi-Wire (2-wire JTAG) protocol. The MSP430’s ultra-low power Flash memory can be erased and
programmed in seconds with no external power supply required. The LaunchPad interfaces MSP430
devices to an integrated software environment such as Code Composer Studio Version 4 or IAR
Embedded Workbench. These IDEs are free and unrestricted on MSP430 Value Line devices. The
LaunchPad supports all MSP430G2xx Flash parts in a 14 or 20-pin DIP package.
712-2649 MSP430 LaunchPad Dev Kit 1+ S$ 8·40698-6953 MSP430F5438 Experimenter Board 1+ S$ 305·00
A development platform for the latest generation MSP430 MCUs featuring a 100-pin socket which
supports the MSP430F5438 and other devices with similar pinout, and allows for quick upgrades to
newer devices or quick applications changes. It is compatible with many TI low-power RF wireless
evaluation modules such as the CC2520EMK. The Experimenter Board helps designers quickly learn
and develop using the new F5xx MCUs, which provide the industry’s lowest active power
consumption, more memory and leading integration for applications such as energy harvesting,
wireless sensing and automatic metering infrastructure (AMI).
MSP430F5438, 16-Bit Ultra-Low-Power Microcontroller 18MHz
256KB Flash memory, 16KB RAM, 5-channel 12-bit ADC
34x GPIO, 12x PWM outputs, 4x UART/LIN/IrDA/SPI, 4x I
2
C/SPI
JTAG header for real-time, in-system programming
USB data connectivity
Microphone input with TLV2760, Audio output with TPA301 mono amplifier
Support for TI Low Power RF Wireless Evaluation Modules and eZ430-RF2500T
5-position joystick, 2x Pushbutton, 2x LED
138x110 greyscale, dot-matrix LCD
3-axis accelerometer (ADXL330)
619-5823 MSP-FET430UIF Debug kit 1+ S$ 191·00
A Flash emulation tool for MSP430 MCU application development. It includes a USB debugging
interface used to program and debug the MCU in-situ via JTAG interface or pin-saving Spy-Bi-Wire
protocol. The ultra-low power MSP430 flash memory can be erased and programmed in seconds with
only a few keystrokes, and requires no external supply. The debugging tool interfaces the MSP430 to
the included integrated software environment and includes code to start your design immediately.
These tools support development with all MSP430 flash devices.
Connects any MSP430 Flash device to a PC USB port
Software-configurable supply voltage 1.8 to 5Vdc at 100mA
USB interface pod uses standard 14-pin JTAG connector
Can burn JTAG security fuse
698-6969 LM3S3748 USB H/D Eval Kit 1+ S$ 186·00
A compact and versatile evaluation platform for the Stellaris LM3S3748 ARM Cortex-M3-based MCU,
supplied with Keil development tools. MCU I/O access via break-out pads.
Stellaris 50MHz LM3S3748 MCU with 128Kbyte Flash and 64Kbyte SRAM
Separate USB Host and Device connectors
USB 2.0 full-speed (12 Mbps) Host/Device controller
Connector for 2-channel oscilloscope application
Colour LCD graphics display with 128x128 pixel resolution
User LED and navigation switch for press functionality
8
Ω loudspeaker with amplifier
microSD card socket
DC jack for optional +5V power supply
ARM
ᓼ 20-pin JTAG/SWD debug with in+out modes
709-4314 F28335 eZdsp starter kit 1+ S$ 960·00
TMS320F28335 Floating-Point DSC with 150 MHz operation
512 KB on-chip flash memory, 68 KB on-chip RAM
128k x 16 off-chip SRAM
12-bit ADC with 16 input channels
Clamshell socket for the F28335 DSC
Multiple expansion connectors provide access to all F28335 I/O
signals
RS-232 interface with on-board transceiver and 9-pin D-connector
CAN interface with on-board transceiver and 9-pin D-connector
Multiple expansion connectors provide access to all F28335 I/O
signals
Embedded USB JTAG Controller
IEEE 1149.1 JTAG emulation connector
709-4403 Piccolo Motor Control and PFC Developer’s Kit 1+ S$ 720·00
A development kit allowing evaluation of all the features of the Piccolo microcontrollers in motor
control applications, based on the C2000
ᓽ 32-bit Real-time MCU’s (TMS320F28035)
Supplied with:
Piccolo F28035 controlCARD
PFC and dual motor control baseboard with onboard isolated USB JTAG emulation
24V DC desktop power supply
55W permanent magnet motor
Code Composer V3.3 with 32KB code size limit
Detailed example software and documentation
Complete hardware schematics, gerber files, etc.
698-6931 Piccolo TMS320F28035 Experimenter Kit 1+ S$ 171·00
This Experimenter’s Kit is a quick, easy, low-cost way to evaluate the Piccolo TMS320F28x family of
devices. It consists of a docking station and an F28x controlCARD
ᓽ
. The docking station is a small
mother board that accepts any of the plug-in controlCARDs and gives the user access to all the F28x
device’s GPIO and ADC signals. Additionally, it also provides two prototyping areas (one on each side
of the DIMM100 connector) with an array of 0.1in pitch plated through holes for wire-wrapping and
soldering.
On-board USB emulation or the ability to use an external
JTAG emulator
Ability to use either the USB +5Vdc supply or an external
power supply to power the board
UART communications header
Boot jumpers for all boot modes
3.3 & 5V supplies for prototyping area
All GPIO, ADC, and other key signal routed to gold edge
connector fingers
All key signals accessible via clearly labelled header pins
Extensive supply pin decoupling with L+C close to pins
ADC inputs have diode protection and anti-aliasing filter
698-6966 Development Tool for TMS320VC550x DSP 1+ S$ 95·00
The TMDX5505eZDSP is a small form factor, very low cost USB-powered DSP development tool which
includes all the hardware and software needed to evaluate the TMS320VC5504/C5505 DSPs. The USB
port provides enough power to operate the ultra-low-power C5505 so no external power is required. It
has embedded XDS510 emulator for full source level debug capability and supports Code Composer
Studio
ᓽ
Rev. 4.0 IDE and eXpressDSP
ᓽ
software which includes the DSP/BIOSv kernel.
TMS320VC5505 fixed-point low-power DSP
Embedded XDS100 emulator; I
2
C serial EEPROM
TLV320AIC3204 32-bit programmable low-power stereo codec
Line In, Headphone Out and Expansion connectors
Removable USB stick enclosure
796
www.nguyenxuong.com