User`s manual

Hardware Installation
Figure 10. eInstrument Node – cabled PCI Express adapter (x1 lane) for XMC Modules (II P/N 90181)
Figure 11. eInstrument PC – embedded PC (Windows/Linux) hosts two XMC modules (II P/N 90199)
XMC systems should be be compatible with VITA 42.3 specification for P15.
The P16 interface can only be used when the PCI Express interface is present and active. The XMC P16 interface to the host
may be customized in the Application Logic. Host card support for P16 interfaces varies so this must be verified on a case-
by-case basis to determine compatibility. In the specific description of each module, the P16 connection pinout is provided in
this manual. Innovative's adapter cards provide access to P16 IO for system integration. Contact technical support if you
need any assistance in checking compatibility with the X5 XMC P16 interface.
System Requirements
The PCI Express slot must be PCI Express 1.0a compatible and be able to map the following resources.
X5-GSPS User's Manual 27