Datasheet

34 PSoC Designer IDE Guide, Document # 001-42655 Rev *B
Chip-Level Editor
Comparator Analog LUT
Comparator Analog LUT connections do not apply to CY8C25xxx/26xxx parts. To set Comparator
Analog LUT connections:
1. Click the AnalogLUT_x box. (Its symbol is identified in the Comparator x line along each column
of analog PSoC blocks.)
2. Select an option from the menu.
You see connections on the device interface reflecting your A or B selection with associated
symbols.
2.5.2 Digital Interconnect Row Input Window
The Digital Interconnect Row Input window connections do not apply to CY8C25xxx/26xxx parts.
Connection to Global Input
To set a Connection to Global Input:
1. Click on the white box or the line of the target Row_x_Input_x. (A tool tip will appear to identify
your selection.)
Figure 2-17. Digital Interconnect Row Input
2. Click on the Row_x_Input_x Mux in the Digital Interconnect Row Input floating window and select
a Global Input from the menu. (You immediately see a connection from the mux to the Global