Datasheet

PSoC Designer IDE Guide, Document # 001-42655 Rev *B 61
System-Level Editor
3.2 Create a New Project
Click File → New Project, or [Ctrl] + [Shift] + [N], to start with a new blank design. You will be
prompted to name and save your design immediately.
3.2.1 Add Design Elements
You create designs by selecting the tab that contains the type of design element you want to add
(Inputs, Outputs, Valuators, or Interfaces) from the Driver Catalog, see Figure 3-2, and then dragging
and dropping elements from the Driver catalog, see Figure 3-2.
Figure 3-2. Driver Catalog