Datasheet

62 PSoC Designer IDE Guide, Document # 001-42655 Rev *B
System-Level Editor
As you go through the Drivers and Valuators list in the Driver Catalog, A Current Device Description
window (Figure 3-3) opens and provides information about the most recent device you have
selected. If you do not see the window, choose Datasheet Window from the View menu.
Figure 3-3. Current Device Description Window
Immediately after you release the driver on the desktop, the Add Output Driver window appears.
This window allows you to rename your driver and set any properties that you wish as you add the
driver. The driver datasheet is displayed in the Add Output Driver window to aid you in assigning
property values. You can go back later and edit properties at any time. When you are finished editing
properties, click OK to place the driver in your design.
Elements added to the desktop appear as icons (Figure 3-4). Click and drag elements to any loca-
tion on the desktop.
Figure 3-4. Element Icons on the Desktop
3.2.2 Use Pop Up Menus
When you right click a design element, you have access to these functions:
 Transfer Function – Opens a window to edit the transfer function logic, change the input(s), or
select another transfer function (not applicable to input and interface drivers, and interface valua-
tors).
 Properties – Opens a window to configure the element.
 Datasheet – Displays the driver datasheet.
 Rename – Opens a dialog box to change the name of the element.
 Delete – Deletes the selected element.