Datasheet

64 PSoC Designer IDE Guide, Document # 001-42655 Rev *B
System-Level Editor
3.2.5 Delete Elements
To delete any element, including text labels and boxes, right click on the element and select Delete.
You can also select an element and press [Delete].
3.2.6 Save a Design
You have three options when saving your project:
 Click Save, [Ctrl] + [S]
 Select File → Save As
 Click Save All, which saves all open projects
3.3 Simulating Your Design
The Simulation desktop (Figure 3-6) allows you to simulate your design.
Figure 3-6. Simulation Desktop
There is no limit to the number of times you can switch back and forth between the Design and Sim-
ulation desktops. When constructing a complex design, it is best to simulate the design incrementally
as you add and define more outputs.
3.3.1 Widgets
A “widget” appears during simulation for every input and output device. The input device widgets
allow you to change the input state. The state of each output is displayed by its widget.
3.3.2 Navigation Tools
The same navigation tools, such as zooming and panning (see “Use Navigation Tools” on page 63),
are available in Simulation mode. Any view changes you make on either the Design or Simulation
desktop are reflected on both desktops.
You cannot add, delete, or edit elements in Simulation mode.
Simulation Controls
Widgets