Datasheet

PSoC Designer IDE Guide, Document # 001-42655 Rev *B 71
System-Level Editor
3.8.2 BOM Vendor
This pull down list allows you to select a specific vendor (or none) to view the bill of materials (BOM).
Some vendors participate in an agreement with Cypress so that once your design is complete you
can order the necessary parts automatically.
3.8.3 Assign Pins Automatically
This check box allows PSoC Designer to assign the pins for you.
 If you check this box and click OK, the build process begins immediately.
 If you uncheck this box, the OK button becomes a Next... button. When you click Next..., you pro-
ceed to the next step in the build process.
3.9 Assigning Pins
Depending upon your design, you may want to assign the pins yourself. If so, uncheck Assign Pins
Automatically and click Next... on the Configuration Selection window to open the User Pin Assign-
ment window.
Figure 3-8. User Pin Assignment Window
PSoC Designer automatically assigns the drivers to pins on the selected chip and displays a chip
footprint and the pin assignment.
You can manually reassign any pin by dragging the blue rectangle associated with its input/output
driver off the top of the pin. As you drag, you see that one or more pins on the footprint are high-