Datasheet

PSoC Designer IDE Guide, Document # 001-42655 Rev *B 79
System-Level Editor
The application loads with the PSoC Designer hex file in memory. Follow instructions in the PSoC
Programmer User Guide to program the PSoC device.
3.13 Monitoring Your Design
The board monitor is a debugging tool similar to the simulation tab, except that it is designed to be
used while attached to a prototype board through a communication interface that allows you to mon-
itor changes in the various design elements in real time.
The default communication for the board monitor is I
2
C uses the CY3240-I2USB I2C to USB Bridge
Debugging/Communication Kit. This allows you to monitor the board using the same ISSP (In Sys-
tem Serial Programming) connector that you use to program it.
Figure 3-11. Monitoring Desktop
When you are done programming, exit the PSoC Programmer application. Not exiting the applica-
tion may cause some communication errors between PSoC Designer and PSoC Programmer.
Monitor Controls
Widgets