Information
March 16, 2015 Document No.001-90674 Rev. *E 1
Release Notes
CY8CKIT-049-42xx PSoC
®
4 Prototyping Kit
Release Date: March 16, 2015
Thank you for your interest in the CY8CKIT-049-42xx PSoC 4 Prototyping Kit. This document lists
the software and hardware updates for the kit.
Kit Contents
The CY8CKIT-049-42xx PSoC 4 Prototyping Kit includes the following items with the kit:
CY8CKIT-049-42xx PSoC 4 Prototyping board
Quick Start Guide
Code Examples and Kit Collateral
The code examples shipped with this kit require PSoC Creator 3.1 Service Pack 1 or later. This is
available with kit installer or on the PSoC Creator webpage (www.cypress.com/go/psoccreator).
PSoC Creator also installs the PSoC Programmer software, which is used to program the PSoC
devices.
The kit installer also installs the USB-Serial Software Development Kit (SDK)
(www.cypress.com/?rID=83110). The USB-Serial SDK consists of USB-Serial Configuration
Utility that can be used for configuring the on-board USB-Serial device.
The CY8CKIT-049-42xx PSoC 4 Prototyping Kit webpage (www.cypress.com/go/cy8ckit-049-
42xx) includes the kit installation packages, CD image (ISO), and setup files (EXE) to install the
code examples shipped with this kit. See the kit user guide included in the kit installer, or the kit
web page for more details on the hardware and examples.
Kit Revision
The code examples of the kit are updated to support PSoC Creator 3.1 SP1. There are no
hardware changes on the kit.
Documentation
The following kit documents are available on the kit webpage:
CY8CKIT-049-4xxx UserGuide.pdf
CY8CKIT-049-42xx QuickStartGuide.pdf
CY8CKIT-049-42xx ReleaseNotes.pdf
Technical Support
For assistance, go to http://www.cypress.com/go/support or contact our customer support at
+1 (800) 541-4736 Ext. 2 (in the USA), or +1 (408) 943-2600 Ext. 8 (International).