User manual

CY8CKIT-049-4xxx PSoC® 4 Prototyping Kit Guide, Doc. #: 001-90711 Rev. *G 23
Kit Operation
8. In the configuration window, select the Dependencies tab and click the Browse button to point to
the HEX and ELF files present in the ‘Dependencies’ folder under project directory; click OK. The
file paths (assuming the CY8CKIT-040-42xx) will appear as follows:
<Project_Directory>\SCB_Bootloader\UART_Bootloader.cydsn\CortexM0\
ARM_GCC_484\Debug\UART_Bootloader.hex
<Project_Directory>\SCB_Bootloader\UART_Bootloader.cydsn\CortexM0\
ARM_GCC_484\Debug\UART_Bootloader.elf
Figure 3-11. Configure Dependencies for Bootloader Component
9. Select Build > Build Bootloadable Blinking LED.
Figure 3-12. Build the Project