User manual

CY8CKIT-049-4xxx PSoC® 4 Prototyping Kit Guide, Doc. #: 001-90711 Rev. *G 45
Code Examples
6. When the project opens in PSoC Creator, navigate to the Workspace Explorer window, right-click
on the project, and select Build Settings.
Figure 5-10. Accessing Build Settings
7. Because this project was originally set as a Normal Application Type, we need to change it to
Bootloadable. In the Application Type drop-down menu, select Bootloadable. Click Apply and
then OK.
Figure 5-11. Project Build Settings