User manual

CY8CKIT-049-4xxx PSoC® 4 Prototyping Kit Guide, Doc. #: 001-90711 Rev. *G 47
Code Examples
10.Double-click on the placed bootloadable component to configure the selections.
Figure 5-14. General Tab Parameters
11.Click the Dependencies tab to select the .hex and .elf files from the UART Bootloader project
included with the kit (<Install_Directory>\CY8CKIT-049-42xx\<version>\Firm-
ware\SCB_Bootloader\ UART_Bootloader.cydsn\CortexM0\ARM_GCC_484\Debug\). This is
done to point the bootloadable project to the bootloader running in the kit. Click Apply and then
OK.
Figure 5-15. Dependencies Tab Parameters