User manual

58 CY8CKIT-049-4xxx PSoC® 4 Prototyping Kit Guide, Doc. #: 001-90711 Rev. *G
USB-Serial Configuration
4. Click Connect.
After connecting to the device, a new tab opens that displays the device marketing part number.
Figure 6-3. Selecting the Connected Device
5. Select the new tab and begin configuring the device.
6.2.2 Configuring a Serial Port
The USB-Serial device acts as a USB-UART bridge for the CY8CKIT-049-4xxx development kit. You
can use the Configuration Utility to read the default settings and configure new UART settings.
1. After connecting to the USB-Serial device, click the CY7C65211-24LTXI tab.
2. Select the SCB tab under the CY7C65211-24LTXI tab to see the default UART settings on the
USB-Serial device.
Figure 6-4. Configuring the Serial Port