User manual

76 CY8CKIT-049-4xxx PSoC® 4 Prototyping Kit Guide, Doc. #: 001-90711 Rev. *G
6. Select Debug > Program.
Figure A-11. Programming the CY8CKIT-049-4xxx
The Select Debug Target window opens.
Figure A-12. Debug Target Window
7. Click Port Settings, set the connector to 5 pin, and then click OK.
8. Click Port Acquire to detect the target device, click Connect, and then click OK.
PSoC Creator programs the target. When programming is complete, the PSoC 4 will contain the
bootloader but not any application code.
To bootload any application code, refer:
“Programming a CY8CKIT-049-4xxx Project Using the Bootloader” on page 19.