User manual

CY8CKIT-050 PSoC® 5LP Development Kit Guide, Doc. # 001-65816 Rev. *E 11
2. Getting Started
2.1 Introduction
This chapter describes how to install and configure the PSoC 5LP Development Kit. Chapter 3
describes the kit operation. It explains how to program a PSoC 5LP device with PSoC Programmer
and use the kit with the help of a code example. To reprogram the PSoC device with PSoC Creator,
see the CD installation instructions for PSoC Creator. Chapter 4 details the hardware operation.
Chapter 5 provides instructions to create a simple code example. The Appendix section provides the
schematics and bill of materials associated with the PSoC 5LP Development Kit.
2.2 CD Installation
Follow these steps to install the PSoC 5LP Development Kit software:
1. Insert the kit CD into the CD drive of your PC. The CD is designed to auto-run and the kit menu
appears.
Figure 2-1. Kit Menu
Note If auto-run does not execute, double-click cyautorun.exe on the root directory of the CD.