User Manual Part 2

CY8CKIT-042-BLE Bluetooth® Low Energy (BLE) Pioneer Kit Guide, Doc. # 001-93731 Rev. *A 150
Advanced Topics
6. After programming has completed, the following message appears, as shown in Figure 6-46:
“Programming Finished Successfully”.
Figure 6-46. Programming Finished Successfully
7. The factory program is now successfully restored on the PSoC 5LP. It can be used as the
programmer/debugger for the PSoC 4 BLE/PRoC BLE device.
6.5 Using FM24V10 F-RAM
The BLE Pioneer board has an onboard ferroelectric RAM chip that can hold up to 1 Mb of data. The
chip provides an I
2
C communication interface for data access. It is hardwired to the I
2
C lines (P3_4
and P3_5); the same lines are also routed to the PSoC 5LP I
2
C lines. Because the F-RAM device is
an I
2
C slave, it can be accessed or shared among various I
2
C masters on the same line. For more
details on the F-RAM device, refer to the device datasheet.