Operating instructions

3-2 (E)
DFP-R3000
Required equipment
Equipment Specification Model name
Oscilloscope DC to 250 MHz TEKTRONIX 2465B or equivalent
four channels
DFP-D3000 — —
Projector — —
Personal computer MS-DOS 5.0V or higher IBM PC/AT compatible
Terminal software Communication format —
(Baud rate ; 9600 baud, Data length ; 8 bits,
Non parity, Stop bit ; Fixed to one bit)
SDDS Setup Software — —
Required Tools
Name Part number Remarks
Connection cable Supplied with DFP-R3000
RS-232C Null modem cable — —
Alignment film 1-759-836-11 with data sheet
Guide height adjustment tool J-6187-860-A
Filter tool Pending
Thickness gauge (10 µm) J-6188-000-A Required 2 pcs
Thickness gauge 9-911-053-00
L shaped hex. wrench (across ; 2 mm) 7-770-736-03
L shaped hex. wrench (across ; 2.5 mm) 7-770-736-04
L shaped hex. wrench (across ; 3 mm) J-6510-180-A 7.5 mm (Refer to “1-4. Tools”.)
Hex. head screw driver (across ; 1.27 mm) —
Hex. head screw driver (across ; 2.5 mm) 7-700-766-05
Nut driver (across ; 5 mm) 7-721-052-05
Eccentric driver (ø1.5-ø2.5) J-6187-880-A
Eccentric driver (ø2-ø4) 3-702-390-01
Eccentric driver (ø3-ø5) 3-702-391-01
Cleaning cloth 3-184-527-01
Cleaning fluid 9-919-573-01
Screw locking compound 7-432-114-11
Installation reels (A) 9-936-836-01 Error rate checking
Installation reels (SR) 9-936-837-01 Error rate checking