Operating instructions

3-12 (E)
DFP-R3000
2. Clearance adjustment
Required Tools
Eccentric driver : J-6187-880-A
Thickness gauge : 9-911-053-00
Procedure
n
Do not damage onto the film running surface of the
sprocket by moving the thickness gauge too hard.
3-1. Mechanical Parts Replacement
(1) Checking 1
Insert a 0.3 mm thickness gauge between the film
retainer rollers (A and B) and the film running surface
of the sprocket.
While lightly pressing the film retainer rollers in the
direction arrow, turn the film retainer rollers.
In this condition, check that the film retainer rollers
rotate and that the film retainer rollers and sprocket do
not catch the thickness gauges.
Sprocket
PAD plate
Sprocket
Sprocket
Film running surface Film running surface
Thickness gauge
(0.3 mm)
Thickness gauge
(0.3 mm)
Thickness gauge
(0.3 mm)
Thickness gauge
(0.3 mm)
Film retainer 
roller
Film retainer 
roller