Operating instructions

1-2 (E)

DFP-R3000

1-2. Removal of Cabinet

Front panel assembly

(1) Remove the two screws (B3 x 4) and four screws (B2.6 x 6).

(2) While holding the S2 guide to the direction of the arrow 1, remove the front panel assembly in the

direction of the arrow 2.

Optics cover

(1) Remove the front panel assembly.

(Refer to the procedure of the removal of the front panel assembly.)

(2) Remove the four screws (PSW3 x 8), and then remove the optics cover.

Drum cover

(1) Remove the two screws (B3 x 4), and then remove the drum cover from the S1 guide shaft and drum

shaft.

Right side plate

(1) Remove the two screws (B3 x 4) and four screws (B2.6 x 6), and then remove the right side plate.

Left side plate

(1) Remove the four screws (B2.6 x 6), and then remove the left side plate.

1-2. Removal of Cabinet

B2.6 x 6

PSW3 x 8

B2.6 x 6

B3 x 4

B2.6 x 6

Front panel assembly

Drum cover

Drum shaft

Optics cover

Right side plate

Left side plate

B2.6 x 6

B3 x 4

S1 guide shaft

B3 x 4

S2 guide

RD-53 board