Data Sheet

Document Number: 002-30628 Rev. ** Page 29 of 46
PRELIMINARY
CYBT-213066-02
CYBT-213067-02
Chipset RF Specifications
Table 20, Table 21, Tabl e 22, and Ta ble 23 apply to single-ended industrial temperatures. Unused inputs are left open.
Notes
6. The receiver sensitivity is measured at BER of 0.1% on the device interface with dirty TX Off.
7. Desired signal is 10 dB above the reference sensitivity level (defined as –70 dBm).
8. Desired signal is 3 dB above the reference sensitivity level (defined as –70 dBm).
Table 20. BR/EDR - Receiver RF Specifications
Parameter Mode and Conditions Min Typ Max Unit
Receiver Section
Frequency range – 2402 – 2480 MHz
RX sensitivity
GFSK, BR GFSK 0.1% BER, 1 Mbps – –91.5
[6]
–dBm
EDR 2M – –94.5 –
dB
EDR 3M – –88 –
Maximum input – –20 – – dBm
Interference Performance
C/I cochannel GFSK, BR GFSK 0.1% BER
[7]
––11.0
dB
C/I 1 MHz adjacent channel GFSK, BR GFSK 0.1% BER
[7]
–––4.0
C/I 2 MHz adjacent channel GFSK, BR GFSK 0.1% BER
[7]
– – –31.5
C/I ≥ 3 MHz adjacent channel GFSK, BR GFSK 0.1% BER
[7]
– – –42.5
C/I image channel GFSK, BR GFSK 0.1% BER
[7]
– – –24.0
C/I 1 MHz adjacent to image channel GFSK, BR GFSK 0.1% BER
[7]
– – –35.0
Out-of-Band Blocking Performance (CW)
[8]
30 MHz to 2000 MHz BR GFSK 0.1% BER – –10.0 –
dBm
2000 MHz to 2399 MHz BR GFSK 0.1% BER – –27 –
2498 MHz to 3000 MHz BR GFSK 0.1% BER – –27 –
3000 MHz to 12.75 GHz BR GFSK 0.1% BER – –10.0 –
Intermodulation Performance
[7]
BT, interferer signal level BR GFSK 0.1% BER – – –39.0 dBm
Spurious Emissions
30 MHz to 1 GHz – – – –57.0
dBm
1 GHz to 12.75 GHz – – – –47.0